manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 158 / 374

Share
Download
Nortel CC MIS User Manual Download Page 158

8-16                                                                                                                                                                                    297-2671-545

CC MIS 

Release 5.2

Deleting a Partition

Deleting a partition in a network does not delete occurrences of that
partition in Virtual Network Configuration on other nodes in the net-
work or on the NAPs on local node.

The following conventions are used when the partition name for a par-
tition on a remote node cannot be determined:

•

If the partition has been deleted, the partition name is displayed as 
(DELETED).

•

If the physical node is down, any partition names associated with 
it is displayed as (UNAVAILABLE).

Perform the steps below to access the Partition Configuration menu
and delete a partition.
 

This configuration information is not automatically
deleted because it is possible that nodes may be dis-
connected or down during configuration changes. 

Note:

1. Access the Maintenance and Administration menu.

2. Enter c to access the Configuration main menu.

     The system displays the Configuration main menu.

3. Select Partition Configuration to access the Partition 
    Configuration screen. 

4. Press the Delete Partition key. 

5. Menu appears with a list of partitions. 

6. Select the partition to delete.

7. Confirm the deletion in the dialog box that appears.

8. The partition is deleted and the system resources used by that partition
    are freed.

Step 8-3:  Deleting a partition

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments