Nortel CC MIS, User Manual, Page: 99 / 374

CC MIS Maintenance Guide 6-15
CC MIS
CC MIS
Release 5.2
Field descriptions
The SNMP configuration screen fields are described in the table
below.
Table 6-2: SNMP field descriptions
Field Description
Community The communities are as follows:
Read-only - Lists the IP addresses of
SNMP managers who may query MIB
variables.
Read-write - Lists the IP addresses of
SNMP managers who may both query
and set MIB variables.
Trap - Lists the IP addresses of SNMP
managers who are to receive traps
generated by the system MIBs.
Name This name can be 1 to 15 characters in
length. Any character except the verti-
cal bar can be used. The Read-only
and Read-write communities can have
the same name, However it is not rec-
ommended. When they both have the
same name, the Read-write communi-
ty member list is searched first.
Members This area lists the IP addresses of
SNMP managers that have access to
the community. An entry of 0.0.0.0 is
used to indicate that all SNMP man-
gers are considered part of that com-
munity.
Note: The 0.0.0.0 cannot be used in
the Trap community because CC MIS
needs an explicit list to which traps are
to be sent.