manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 252 / 374

Share
Download
Nortel CC MIS User Manual Download Page 252

System Log Messages

CC MIS 

 

CC MIS 

 B-12                                                                                                                                                                     297-2671-545

Release 5.2

Asked to delete unknown partition “nnn”

A partition deletion request was received for a unknown partition. (Action Code: L)

Asked to disable networking for unknown partition “nnn”

(future)

A request was received to disable networking for an unknown partition. (Action Code: B)

Asked to enable networking for unknown partition “nnn”

(future)

A request was received to enable networking for an unknown partition. (Action Code: B)

Asked to lock “xxxxxx” in unknown partition “nnn”

A lock request was received to lock the “xxxxxx” resource in an unknown partition whose ID is given by “nnn”. 
(Action Code: B)

Asked to register xxxxxx “nnn” against unknown partition “ppp”

A request was received to register an IPC object against an unknown partition. The IPC object being registered is 
identified by:

xxxxxx Specifies the type of IPC object, where SHMID identifies a shared memory segment, SEMID iden-

tifies a semaphore, and MSGID identifies a message queue.

nnn

Specifies the ID number of the IPC object.

(Action Code: B)

Asked to run “xxxxxx” in inactive partition “nnn”

A request was received to run program “xxxxxx” in a partition which is currently in the stopped state. (Action 
Code: L)

Asked to run “xxxxxx” in unknown partition “nnn”

A request was received to run program “xxxxxx” in a partition which is unknown. (Action Code: L)

Asked to run “xxxxxx” on unknown node “nnn”

A request was received to run program “xxxxxx” on a node which is unknown. (Action Code: L)

Asked to set environment for unknown partition “nnn”

A request was received to set an environment variable in a unknown partition. (Action Code: B)

Asked to set process limit for unknown class “xxxxxx”

A request was received to change the process limit for an unknown transient program class. (Action Code: L)

Asked to set process limit for unknown partition “nnn”

A request was received to change a transient process limit for an unknown partition. (Action Code: L)

Asked to start unknown partition “nnn”

A request was received to start an unknown partition. (Action Code: L)

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments