manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 175 / 374

Share
Download
Nortel CC MIS User Manual Download Page 175

CC MIS Maintenance Guide                                                                                                                                  9-7

CC MIS 

CC MIS 

Release 5.2

Test individual  I/O ports

The Test Individual I/O Ports command determines the system's abil-
ity to communicate with an individual port.  The Test Individual I/O
Ports command is available only when CC MIS is running. 

Figure 9.4  Test individual I/O screen

Perform the steps below to test an individual port.

Testing a port that is in use may have undesirable
results and is not recommended.

Note:

1. Access the Test Individual I/O screen from the Diagnostics menu.

2.At the prompt, type the name of the port to be tested.

3. To exit, type q at the prompt.

Step 9-5:  Testing an individual port

The Test Individual I/O 
Ports command is not 
available on PowerPC 

platforms.

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments