Nortel CC MIS, User Manual, Page: 66 / 374

4-2 297-2671-545
CC MIS
Release 5.2
Start up CC MIS
Perform a start up of CC MIS if you shutdown CC MIS.
Start up/shut down partitions
Perform start up and shut down of CC MIS partitions from the Run
State Utilities menu. It is also available in Partition Configuration
screen (refer to Chapter 7).
Power down CC MIS
The Power down command is used to remove power to CC MIS. The
power down command is selected from the Run State Utilities menu.
Shut down CC MIS
Using this command shuts down the CC MIS software, leaving the op-
erating system, non-CC MIS programs, and CC MIS maintenance
software running.
If you request a maintenance function that can only be performed with
CC MIS shutdown, the maintenance and administration software au-
tomatically shuts down CC MIS. The system does not need to be shut
down manually. (The exceptions are the Test All I/O Ports function
and changing the Network Name, both of which require manual shut-
down.)
Use the power button to power up CC MIS after a
power down.
Note:
If you want to shut down both the CC MIS software
and the UNIX operating system, you must use the
power down command.
Note:
Automatic logout
CC MIS supervisor's are automatically logged out
if the CC MIS system is shut down.