manualshive.com logo in svg

Nortel CC MIS, User Manual, Page: 239 / 374

Share
Download
Nortel CC MIS User Manual Download Page 239

CC MIS Maintenance Guide

 

         

                      

 

                     A-1

Technical specifications

CC MIS 

 

CC MIS 

Release 5.2

Technical specifications

This appendix covers the following technical specifications for the CC MIS system: 

•

real-time performance

•

reliability

•

personal computer support

•

power requirements

•

environmental requirements

Real-time performance

CC MIS is a message-driven system.  Messages received from the DMS-ACD translate into many
intertask messages that are used to drive the CC MIS Supervisor displays and other internal soft-
ware.  The real-time performance of the system depends largely on two factors, the message arrival
rate (MAR) and the message service rate (MSR). 

Reliability

Consistent configuration data

ACD configuration data in the DMS-ACD and in the CC MIS system are kept consistent with one
another.  The DMS-ACD maintains a master copy of the configuration data.  This data will be re-
quested by the CC MIS whenever it initializes for any reason, such as recovery after the failure of
the DATA LINK or the application software.  If the DMS-ACD should initialize for any reason,
then CC MIS  will take down the application software and request that the configuration data be
sent.

CC MIS has disk mirroring capability.  Disk mirroring provides increased data protection and soft-
ware/data availability. Disk Mirroring is provided by RAID hardware. 

Disk mirroring is a purchasable option.

Note:

a

Summary of Contents for CC MIS























































































































































































































































































































































































Reviews:

No comments