71
OPERATING PROCEDURES
:
Setting Processing Conditions and Entering Layout Data
2
{
Setting WD (width of the segment mark of the multifocal lens)
Pressing the WD numeric button displays the
ten-key pad. Enter any value and press the
button.
The numeric value can also be
entered by the jog dial.
The numeric value can be entered in increments of 0.5 mm.
For details, see “1.3.8 Ten-key pad screen” (page 25).
The WD represents the distance between the vertical
lines on the right and left.
In accordance with the segment size, set the position eas-
ily to be aligned the position.
Range [15.0 to 45.0 mm (in increments of 0.1
mm)]
It is also possible to set the WD just before plac-
ing the lens on the lens table and blocking the
lens.
㹕㹂
