70
OPERATING PROCEDURES
:
Setting Processing Conditions and Entering Layout Data
Select either of the following.
5
Enter the height of the segment base
point (top line center of segment).
Press the PD
(or BT
) numeric but-
ton to display the ten-key pad. Enter
any value and press the
button.
The numeric value can also be entered
by the jog dial.
For details, see “1.3.8 Ten-key pad screen” (page 25).
6
Enter the size (enlarged or reduced lateral based size of lens shape).
For details of this operation, see “5 Enter the size (enlarged or reduced lateral based size of lens
shape).” (page 65) of 2.5.3 Entering layout data for single vision lenses.
PD
Enter the distance from the
center point on the top line of the
segment straight down to the
point on the lens shape.
BT
Enter the height from the point
level with the center of the
segment on the top line straight
down to the lowest point on the
lens shape.
PD
BT
