76
OPERATING PROCEDURES
:
Shape Editor Function
3
Select a step to be applied when
changing each length.
Press the Step numeric button to dis-
play the pop-up menu.
Select the desired step button from
Tenkey, 0.10, 0.25, or 0.50.
4
As necessary, specify areas that are
not to be changed in shape.
1) Press the Fix area button to
change to fixed area specification
mode.
Numeric values disappear and a section of the lens shape is displayed in yellow. At the ends of the
yellow line, handles (yellow squares) are displayed.
2) Drag the handle with the touch pen
to change the fixed area.
The fixed area can be changed at both ends.
When the fixed area is not displayed, the fixed area may be specified by dragging the shape con-
tour.
3) After setting, press the Fix area button to finish the fixed area entry.
Fixed area
Drag to the desired
position.
