59
OPERATING PROCEDURES
:
Setting Processing Conditions and Entering Layout Data
2
2) Select the desired curve from the menu.
•
Position
Change the position of the whole groove forward/backward.
1) Press the Position numeric button to
display the ten-key pad.
2) Enter the amount to move the
groove forward or backward with the
numeric button and set with the
button. (unit: mm)
The range is -12.8 to 12.7 mm.
Auto
Computer-calculated curve
Curve
Manually enter the desired curve.
Pressing the numeric button displays the ten-key pad. Enter the desired value.
Front
Front base curve (curve profiling the front surface of a lens)
Rear
Rear base curve (curve profiling the rear surface of a lens)
Ratio
Select the groove position on the edge by the ratio.
Pressing the numeric button displays the pop-up submenu. Select the desired
ratio.
Pop-up submenu displayed when Ratio is se-
lected
Negative value
The groove moves toward the front surface.
Positive value
The groove moves toward the rear surface.
