77
OPERATING PROCEDURES
:
Shape Editor Function
2
The screen returns to the numeric values condition and the set fixed area is displayed in yellow.
5
Edit the lens shape.
The lens shape can be changed by entering numeric values or dragging.
After the shape edit, the whole shape is displayed in blue and the pre-change shape is dis-
played in gray.
• The numeric values for any area set not to be changed by the fixed area function are
displayed in gray. Even in areas whose numeric values are not fixed, the numeric value
may not be changed if the area is too small.
The +/- button or ten-key pad is not displayed even if the numeric value displayed in gray is
pressed.
• To cancel the fixed area, press the
Erase button with the Fix area
button selected.
The area displayed in yellow is can-
celed, and the whole shape is dis-
played in blue.
• The changing method varies
according to whether a fixed area is
specified or not. Therefore, similar
changes to the same shape may
have different results.
• When the fixed area is set, the shape can be changed only once.
Dragging or value change can be performed only once. Repeating the changes cancels the previ-
ous change.
• Pressing the Clear button cancels the entered contents and displays the original shape
data.
