124
CONNECTION AND SETTINGS
:
Connection
4.2.2
Setting the Ice 900
Set the Ice 900 according to the system configuration where the Ice 900 is connected.
*1: Set the parameters on the screen for servicing. Ask NIDEK or your authorized distributor for reset-
ting of the above parameters.
*2: Never change the factory setting of Mac Address that had been set uniquely for each individual
Ice 900 before shipment. Do not change the factory settings.
*3: Set these parameters in accordance with the network to which the Ice 900 is connected.
*4: When the NIDEK-produced PC software is used, set the host port No. to “55555”. When the other
software is used, set the host port No. to the port No. of the used software.
Parameter
Blocker Lex
Mini Lab
Blocker Lab
Blocker VCA
Edger port
LAN port
My ID
Ice 900
ID No.: 32
ID No. of the Ice 900: 32
ID No. of the Ice 900:
(Any number except for
the Host ID No.)
–
Host ID
Ice 900
ID No.: 32
ID No. of the Ice 900: 32
ID No. of the host PC
–
Communication speed
38400
38400
–
–
38400
Mac Address *1
–
–
Never change the
factory setting. *2
Never change the
factory setting. *2
–
IP address
–
–
Set the parameter
uniquely for each
individual Ice 900.
*3
Set the parameter
uniquely for each
individual Ice 900. *3
–
Host IP address
–
–
–
Set the parameter
uniquely for each
individual Ice 900. *3
(IP address of the host
PC)
–
Subnet mask *1
–
–
Set the parameter
uniquely for each
individual Ice 900.*3
Set the parameter
uniquely for each
individual Ice 900. *3
–
Default gateway *1
–
–
–
Set the parameter
uniquely for each
individual Ice 900. *3
–
Host port No. *1
–
–
–
55555 *4
–
