126
CONNECTION AND SETTINGS
:
Connection
{
Setting the Le 1000
*1: Set the parameters on the screen for servicing. Ask NIDEK or your authorized distributor for reset-
ting of the above parameters.
*2: Grooving setting and Bevel Guided setting cannot be sent to the Le 1000.
*3: Set these parameters in accordance with the network to which the Ice 900 is connected.
*: When the Ice 900 setting is Blocker VCA, contact NIDEK or your authorized distributor.
Parameter
Blocker Lex
*2
Mini Lab
Blocker Lab
Ext. interface
BK/LE
LAN
LAN
Layout memory
Exec
Exec
Exec
SERVER No. *1
Ice 900
ID No.: 32
Ice 900
ID No.: 32
ID No. of the server PC
ID No.: 32
My ID No. *1
ID No. of the Le 1000:
(Any number except for the
Server No.)
ID No. of the Le 1000:
(Any number except for the
Server No.)
ID No. of the Le 1000:
(Any number except for the
Server No.)
Baud Rate (for EXT.) *1
Set the Baud Rate to the
same value as the Ice 900
Set the Baud Rate to the
same value as the Ice 900
Set the Baud Rate to the
same value as the Ice 900
Communication Device *1
Setting is not necessary
FA-11
FA-11
Blocker support *1
NONE
NONE
NONE
Direct Communication *1
EXEC
NONE, EXEC *3
NONE, EXEC *3
Mini Lab
Mini Lab /
Blocker Lab (LAN when using port)
Host IP address
(IP address of the Ice 900)
Host ID No.
(ID No. of the Ice 900)
ID No.
Host ID No.
(My ID of the Ice 900)
ID No.
