47
OPERATING PROCEDURES
:
Operating Procedures
2
2.4.3
Operation in the Blocker Lab system
■
In the Blocker Lab system, JOB data is saved and controlled by an external host PC.
■
Perform only blocking with the Ice 900.
■
After blocking, the JOB data is automatically transferred to the host PC.
1
Turn on (
|
) the power switch to activate the Ice 900.
For starting procedures, see “2.2 Getting Started and Exiting” (page 33).
2
Enter JOB#.
1) Press JOB#/PTN# on the Layout
screen to display the keyboard
screen.
2) Enter JOB#.
If a barcode scanner is connected, scan
a barcode.
3) Press the
button.
The JOB data is displayed on the Layout screen.
3
Place the right-eye lens on the lens table and block it.
For blocking procedures, see “2.8 Blocking” (page 95).
Upon the completion of blocking, the JOB data is automatically sent to the host PC.
JOB#/PTN#
Òåãåéöå
• When the barcode scanner is connected, JOB data can be received and displayed by
scanning the barcode without manually entering JOB/PTN#.
