41
OPERATING PROCEDURES
:
Operating Procedures
2
2.4
Operating Procedures
2.4.1
Operation in the Blocker Lex system
■
Connect the Ice 900 and Lex 1000 to configure the system.
■
Before blocking, load the traced data, JOB, or PTN data. Set processing conditions and enter
layout data.
■
Trace with the built-in tracing unit of the Lex 1000.
1
Turn on (
|
) the power switch to activate the Ice 900.
For starting procedures, see “2.2 Getting Started and Exiting” (page 33).
2
Load the traced data or JOB/PTN data to the Layout screen.
z
When tracing with the Lex 1000 built-in tracing unit
1) Trace frames or pattern with the Lex 1000.
2) After tracing, the traced data is automatically transferred from the Lex 1000 to Ice 900
and displayed on the Layout screen.
z
When loading JOB or PTN data saved in the Ice 900
1) Press the [Data] tab to display the Data Control screen on the Layout screen.
2) Select a file from the Data Control screen.
For details, see “2.3.3 Loading JOB data saved in the Ice 900” (page 36).
3
Set processing conditions.
• When a JOB whose both eyes are already blocked is loaded, blocking cannot be
performed. Or when an only R (only L) JOB is blocked is loaded, R (L) cannot be blocked.
Processing conditions and layout
