67
OPERATING PROCEDURES
:
Setting Processing Conditions and Entering Layout Data
2
{
Changes in the cup mark shape according to the layout setting
When the Cup mode parameter is set to Pliable/Mini, or Pliable/Nano, the cup mark changes as fol-
lows when the lens shape contacts the circle of the cup mark according to the layout setting.
If the standard lens cup is continued to be used, the
adapter or lens clamp may contacts the processing
wheel because the distance between the blocking point
and lens edge is short.
When the cup mark changes into the cup mark for
small diameter lens, block the lens with a lens cup for
small diameter lens.
Setting
Normal lens processing
Small diameter lens processing
Pliable/Mini
Pliable cup
Mini cup
Pliable/Nano
Pliable cup
Nano cup
• When the Cup mode parameter is set to Half-eye or Pliable, the displayed cup mark is
constant in size. However, when the lens shape contacts the circle of the cup mark, the cup
mark changes from the yellow to red to give caution.
• When the Cup mode parameter is set to Pliable, Pliable/Mini, or Pliable/Nano, the settings
of the Minimum edging H size, and Minimum edging V size parameters become disabled.
Pliable lens whose vertical length is short
• As the cup mark display is a guide, according to the edger or layout, the displayed cup
cannot be processed.
• When the lenses have an excessively short vertical diameter that the processing wheels
may come in contact with the lens cup, even if using a lens cup for half-eye lenses, the
yellow cup mark changes to red to warn the operator of a possibility of contact.
• When the cup mark becomes red by contacting the lens shape or crossing over the lens
shape, be sure not to block the lens.
