8
BEFORE USE
:
Display
Frame center mark
Indicates the center of the lens shape (frame center).
Optical center height [
]
Height of the optical center from the frame center (boxing center)
Range [-15.0 to +15.0 mm (in increments of 0.1 mm)]
PD
and BT
can also be entered.
Shape size
Shows the enlarged or reduced lateral based size from a loaded lens shape.
This is for enlarging or reducing the shape data of the pattern while maintaining a similar form.
Range: [-9.95 to +9.95 mm (in increments of 0.01 mm)]
WD
When Single is selected for the lens type, set the distance
between the vertical alignment lines.
For easy alignment, enter WD in accordance with the distance
between the markings on the lens.
Range [15.0 to 45.0 mm (in increments of 0.1 mm)]
When Multi is selected for the lens type, display the width of the
segment.
For easy alignment, enter WD in accordance with the width of the
segment.
When Progressive is selected for the lens type, display the width of the hidden marking.
For easy alignment, enter WD in accordance with the distance between the hidden markings.
Lens type button
Changes the lens type [Single, Multi, Progressive, and Demo lens] to be blocked.
Layout mode button
Changes the layout mode [Active, Passive].
Safety beveling button
The selectable options depend on the connected lens edger. Set them with the Polish/SFB Setting
parameter.
When the Polish/SFB Setting parameter is set to Le/Lex:
The selectable options are “SFB” and “None”.
When the Polish/SFB Setting parameter is set to Me/Se:
The selectable options are Small, Medium, Large, Special, and None.
When set to high curve, safety beveling cannot be set.
Polishing button
The selectable options depend on the connected lens edger. Set them with the Polish/SFB Setting
parameter.
WD
²±
²±
