16
BEFORE USE
:
Display
[Blocking screen (Demo lens)]
■
For the demo lens, when the lens cannot be hold with the three pins as the lens is small, use the
small-diameter lens holder to block in demo lens mode.
■
Align the markings of demo lens with the alignment scale then block the lens.
■
To display the Demo Lens Blocking screen, select Demo lens for Type from the Blocking screen.
* The items not described in the following are the same as the Blocking screen [Single].
WD mark
The width of the marking changes according to the WD value
entered in the Layout screen.
Horizontal/vertical line
By dragging the horizontal or vertical lines with the touch pen, the line can be aligned on the shape outline.
WD mark
Horizontal/
vertical line
• When blocking in this screen, blocking is performed in slow speed.
When blocking in slower speed, the blocking arm remains stopped at the lowest
position. Then the message “Complete blocking.” appears and press the OK button.
The blocking arm returns to the original position.
×Ä
