61
OPERATING PROCEDURES
:
Setting Processing Conditions and Entering Layout Data
2
2.5.3
Entering layout data for single vision lenses
■
According to prescription, enter lens layout Active/Passive mode.
■
The layout data is displayed on the numeric button next to each item button. Pressing the numeric
button displays the ten-key pad. Or the numeric field of the item can be selected by the left jog dial
and the numeric value can be changed by the right jog dial.
■
When the necessary item is not entered, the corresponding numeric button is highlighted in yellow.
1
Select Single for the lens type from the Lay-
out screen.
2
Press the FPD (or DBL) numeric button
to display the ten-key pad. Enter any
value and press the
button.
The range of the FPD value is 30.00 to 99.50 mm in increments of 0.01 mm.
Pressing the CE button clears the entered value.
The numeric value can also be entered by the jog dial.
The numeric value can be entered in increments of 0.5 mm.
For details, see “1.3.8 Ten-key pad screen” (page 25).
When the traced data includes the frame data
(both-rim tracing), the FPD value is automati-
cally entered together with the traced data.
Ten-key pad
PD
FPD
Optical center
height
ᴥǽᴦ
