![background image](http://html.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_features-and-specifications_248323120.webp)
120
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-10-32
Service Code Setup (for System
Administrator)
– Set Private Call Refuse
Enable/Disable the Private Call Refuse (trunks)
which are set in Program 14-01-27.
MLT, SLT
0 ~ 9,
*
,
#
Maximum of eight
digits
No Setting
11-10-33
Service Code Setup (for System
Administrator)
– Entry Caller ID Refuse
Add/Delete the Caller ID to refuse.
This operation must be performed from a
Keyset.
MLT
0 ~ 9,
*
,
#
Maximum of eight
digits
No Setting
11-10-34
Service Code Setup (for System
Administrator)
– Set Caller ID Refuse
Enable/Disable the Caller ID number (trunks)
which are set in Program 14-01-27.
MLT, SLT
0 ~ 9,
*
,
#
Maximum of eight
digits
No Setting
13-02-01
Group Speed Dialing Bins
Designate the starting and ending bin numbers
the system uses for Group Speed Dialing.
01 ~ 64
0 ~ 9999
Starting bin number range:
0 ~ 9990
Ending bin number range:
0 ~ 9999
No Setting
13-04-01
Speed Dialing Number and Name
– Speed
Dialing Data
Enter the System and Group Speed Dialing
numbers and names.
Maximum of 24 digits (0 ~ 9,
*
,
#
, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
13-04-03
Speed Dialing Number and Name
– Transfer
Mode
When the incoming caller ID matches the
number programmed in the speed dial bin, this
setting determines the destination of the call.
0 = Not Used
1 = Internal Dial
2 = Incoming Ring Group (IRG)
0
Summary of Contents for Univerge SV9100
