NEC Univerge SV9100, Features And Specifications

Page: 891 / 1402

891
The caller is retrieved by the SV9100 and follows the no-answer programming (ring another
extension, forward to SV9100 voice mail, etc.)
Program 15-22-02 set to 2 (No DTMF Confirmation Required):
The caller is forwarded to the external extension voice mail, if available.
Placing a Call from the Mobile Extension
1. Dial the DID or DIL telephone number for the Mobile Extension.
If the Caller ID of the Mobile Extension matches the Speed Dial bin entry (Program 13-04 and
15-22), internal dial tone is heard by the Mobile Extension user.
2. Dial the desired Intercom number or dial the trunk access code to place an outgoing call.
Answering a Call on the Mobile Extension
1. Answer the ringing call.
2. If Program 15-22-02 is set to 0 or 1, the Mobile Extension user hears Music on Hold/ring tone.
Press * (within 10 seconds) to answer the call.
This step is required when using analog trunks for the Mobile Extension feature.
Sending a Flash from the Mobile Extension
1. While on a conversation, a hook flash is returned by dialing
*
# from the Mobile Extension.
Internal Dial Tone After Hang Up
1. When a call is finished, disconnect the call and receive internal dial tone by dialing
*
0 .
Placing/Retrieving a Call on Hold from the Mobile Extension
1. While on a call, press
*
#.
2. To retrieve the held call, with system dial tone, press
*
#.
Swapping Between Two Held Calls from the Mobile Extension
1. While on a call, press
*
#.
The first call is placed on Hold.
2. Place second call, then place on Hold by pressing
*
#.
The second call is placed on Hold and the first call is picked up.
3. The Mobile Extension can connect the two held calls with Automatic On-Hook Transfer if
Program 20-11-11 is enabled by dialing
*
0.
Transferring a call from the Mobile Extension
1. With an active call, press
*
#.
2. Dial the extension number to which the call is to be transferred.
3. Dial * 0.
4. Hang up.