NEC Univerge SV9100, Features And Specifications

Page: 834 / 1402

834
Last Number Redial
Description
Last Number Redial allows an extension user to quickly redial the last number dialed.
For example, a user may quickly recall a busy or unanswered number without
manually dialing the digits.
Last Number Redial saves in system memory the last 24 digits a user dials. The
number can be any combination of digits 0~9,
#
and
*
. The system remembers the
digits regardless of whether the call was answered, unanswered or busy. The system
normally uses the same trunk group as for the initial call. However, the extension user
can preselect a specific trunk if desired.
When Redial is pressed, the display indicates REDIAL [
#
] / ABB. The user can then
press
#
to redial the number displayed, or enter an System Speed Dialing bin
number to be dialed. Press the Redial key repeatedly to scroll through the last 10
numbers dialed.
Cursor Key Operation
By pressing the Left Cursor Key the user can access the Redial and Incoming Call
History menus. The flow chart below shows the menu access sequence. If the
terminal is not allowed to have the Dial Preview feature, these menus cannot be
accessed.
Left Cursor Key Operation Flow Chart
Conditions
Redial List requires the use of a display telephone. Non-display
and single line telephones cannot use this feature.
When using Automatic Route Selection, ARS selects the trunk for the
call unless the user preselects.
Default Settings
Enabled
L