NEC Univerge SV9100, Features And Specifications

Page: 76 / 1402

76
Program
Number
Program Name/Description Input Data Default
44-05-06 ARS/F-Route Table
– Gain Table Number for
Tandem Connections
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Select the gain table
number to be used for the tandem call (defined
in Program 44-07).
0 ~ 500
0 = No Setting
0
44-05-07 ARS/F-Route Table
– ARS Class of Service
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Select the Class of
Service to be used for ARS (0~16). Extension
ARS COS is determined in Program 26-04-01.
0 ~ 16 0
44-05-08 ARS/F-Route Table
– Dial Treatment
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Select the Dial
Treatment to be used (0 ~ 15). The Dial
Treatments are defined in Program 26-03-01.
0 ~ 15 0
44-05-09 ARS/F-Route Table
– Maximum Digit
Set the maximum number of digits to send
when using the F-Route.
0 ~ 24 0
44-05-10 ARS/F-Route
– CCIS over IP Destination
Point Code
For each ARS/F-Route table (1 ~ 500). Set the
CCIS over IP Destination Point Code
(0 ~ 16367).
0 ~ 16367 0
44-05-11 ARS/F-Route
– Network Specified Parameter
Table
For each ARS/F-Route table (1 ~ 500) assign
the priority (1 ~ 4). Assign the Network
Specified Parameter Table (0 ~ 16).
0 ~ 16 0
44-06-01 Additional Dial Table
If an Additional Dial Number Table is entered in
Program 44-05-03, define the additional dial
table (1 ~ 1000) to add digits in front of the
dialed ARS/F-Route number (24 digits
maximum: 1-9, 0 *
#
, Pause). To enter a wild
card/don’t care digit, press Line Key 1 to enter a
P (pause) symbol.
Maximum of 24 digits Enter:
1 ~ 9, 0, *, #, Pause (press
line key 1 to enter a
pause) No Setting