NEC Univerge SV9100, Features And Specifications

Page: 479 / 1402

479
Guide to Feature Programming
Program
Number
Program Name/Description Input Data Default
11-12-42 Service Code Setup (for Service Access)
–
Flash on Trunk Lines
Customize the Service Codes for flash on trunk
lines.
SLT
0 ~ 9,
*
,
#
Maximum of eight
digits
#
3
14-02-03 Analog Trunk Data Setup
– Flash Type
Make sure this item is set for open loop Flash.
0 = Open Loop Flash
1 = Ground
0
14-02-04 Analog Trunk Data Setup
– Hooking Type
For each trunk, select Timed Flash or open loop
Disconnect.
0 = Timed Flash (Hooking)
1 = Disconnect (Cut)
0
14-04-01 Behind PBX Setup
For each trunk, indicate if the trunk is installed
behind a PBX.
0 = Stand Alone (Trunk)
1 = Behind PBX (PBX)
2 = Not Used
3 = CTX assume 9
0
15-02-05 Multiline Telephone Basic Data Setup
–
Transfer Key Operation Mode
For the Cordless Lite/Cordless Lite II telephone
user to use the flash function, this option must
be set to 2. This changes the Transfer key to a
Flash key.
0 = Transfer
1 = Serial Call
2 = Flash
0
15-03-04 Single Line Telephone Basic Data Setup
–
Flashing
Enable/Disable Flash for single line (500/2500
type) telephones.
0 = No
1 = Yes
1