NEC Univerge SV9100, Features And Specifications

Page: 814 / 1402

814
In 21-01-03, enter
the interval for the
trunk interdigit timer.
In 15-07-01, assign
function keys as line
keys (code *01+001- 200).
In 15-07-01, assign CAP Keys
(*08) or line group keys (*02).
Adjust the CODEC Gain
in 14-01-02 (transmit)
and 14-01-03 (receive).
If desired, assign names to
trunks in 14-01-01.
In 11-01-01, set up a
Service Code for
Alternate Trunk Route
Access.
In 11-09-02, assign the
Service Code set up in the
previous step for Alternate
Trunk Route Access.
In 21-15-01, enter the
extension number and
enter the Trunk Group
Routing route number.
In 21-15-01, enter the
extension number
and enter 0 to
prevent routing.
Refer to the Trunk
Group Routing
feature and set up
Trunk Group
Routing.
B
Is the amount of time the system waits before
placing the call in a talk state sufficient?
No
Yes
In 15-07-01, do not assign
function keys as line keys.
No
Should extension users
have one-button placing
of outside calls?
Yes
In 15-07-01, do not
assign Trunk Group
Access or trunk group keys.
No
Should extension users have
one-button access to trunk
groups for placing calls?
Yes
See "CAP Key" in the
Feature & Specification
manual for more details.
Do you want to adjust
Trunks the gain (volume) for
trunks?
No
Check the Analog Trunk Timers in 81-01
for compatibility with the telco. For example, to make
50 the Alternate Trunk
Route Access Code:
DIAL = 5
Digit = 2
Kind = 8
Stop No
Do you want to set up
an Alternate Trunk
Route Access Code?
Yes
Yes
Should extension be
able to use Alternate
Trunk Route Access?
No
Is Trunk Group
Routing defined?
Stop