NEC Univerge SV9100, Features And Specifications

Page: 1238 / 1402

1238

Automatic Route Selection (ARS)

Central Office Calls, Placing

Dial Tone Detection

Direct Inward Dialing (DID)

Multiple Trunk Types

Prime Line Selection

Programmable Function Keys

Trunk Groups
Guide to Feature Programming
Program
Number
Program Name/Description Input Data Default
11-01-01 System Numbering
– Service Code
Set up a Service Code for Alternate Trunk
Route Access.
Set up a Service Code for
Alternate Trunk Route Access.
11-09-01 Trunk Access Code
– Trunk Access Code
If required, change the single-digit Trunk
Access Code (normally 9). This is the code
extension users dial to access Automatic Route
Selection. If you change this code, you must
make corresponding changes in Program
11-01.
Dial (maximum of four digits) 9
11-09-02 Trunk Access Code
– 2nd Trunk Route
Access Code
Define additional trunk access codes. When a
user dials the Alternate Trunk Route Access
Code, the system routes their call to the.
Alternate Trunk Route.
Dial (maximum of four digits) No Setting
14-05-01 Trunk Group
– Trunk Group Number
Assign trunks to trunk groups
.
Trunk Port 1 ~ 400 =
Priority 1 ~ 400 Default = Trunks
1 ~ 400 assigned
to trunk group 1
with priorities
equal to the
trunk number.
Trunk 1 = Priority
1 Trunk 400 =
Priority 400.
14-06-01 Trunk Group Routing
– Priority Order
Number
Set the priority order number (1 ~ 4).
0 = Not Specify
1 ~ 100: (Trunk Group Number)
101 ~ 150: (100 + Networking
System Number)
1001 ~ 1100: (1000 + Route
Table Number)
Route 1, Order
Number 1 = 1
(Trunk Group 1)
Order Numbers
2, 3, 4 = 0 (Not
Specified)
All Other Routes
(2 ~ 100) and
Order Numbers
(1 ~ 4) = 0 (Not
Specified).