NEC Univerge SV9100, Features And Specifications

Page: 233 / 1402

233
Program
Number
Program Name/Description Input Data Default
21-06-06 Toll Restriction Table Data Setup
– Permit
Code Table
Program codes into the Permit Code Tables.
Dial (maximum of 12 digits) Table 1 ~ 4 = No
Setting
21-06-07 Toll Restriction Table Data Setup
– Deny
Restriction Table
Program codes into the Restrict Code Tables
(200 codes per table maximum).
Dial (maximum of 12 digits) Table 1 ~ 4 = No
Setting
21-06-08 Toll Restriction Table Data Setup
– PBX
Access Code
The system allows up to four tables for PBX
access codes. PBX Access Codes can have
up to two digits, using 0~9,
#
, * and LINE KEY
1
(don’t care). Refer to
PBX Compatibility for
the specifics.
Dial (maximum of 2 digits) Table 1 ~ 4 = No
Setting
21-21-01 Toll Restriction for Trunks (Seized Trunk
Basis Setting)
– Restriction Class
Enter the Toll Restriction Class for the selected
trunk.
1 ~ 15 1
34-01-05 E&M Tie Line Basic Setup
– System Toll
Restriction
Determine if an incoming Tie Line call should
be subject to Toll Restriction.
0 = No (Off)
1 = Yes (On)
0
34-08-01 Toll Restriction Data for E&M Tie Lines
Define the Toll Restriction data for E&M Tie
Lines. This data should be defined if Tie Line
Code Restriction is enabled in Program
21-05-13.
Maximum of 10 digits (0~9, *,
#
)
No Setting
35-02-01 SMDR Output Options
– Toll Restricted Call
SMDR can include or exclude calls blocked by
Toll Restriction.
0 = Not Displayed
1 = Displayed
1
Operation
To place a trunk call if your system is Code Restricted:
1. Place call normally.
 If your Code Restriction Class does not allow the number you dial, your call is cut off.