NEC Univerge SV9100, Features And Specifications

Page: 732 / 1402

732
Program
Number
Program Name/Description Input Data Default
15-03-03 Single Line Telephone Basic Data Setup
–
Terminal Type
Enter 1 for this option to allow a single line port
to receive DTMF tones after the initial call
setup. Enter 0 to have the port ignore DTMF
tones after the initial call setup. For Voice Mail,
always enter 1 (e.g., receive DTMF tones).
0 = Normal
1 = Special
0
15-05-50 IP Telephone Terminal Basic Data Setup
–
Peer to Peer Mode
On a per station basis enable or disable Peer to
Peer mode.
0 = Disable
1 = Enable
1
84-06-01 PVA Data Setting
– RTP Port Number
Define the Media Gateway starting RTP Port
Number.
0 ~ 65535 10020
84-06-02 PVA Data Setting
– RTCP Port Number
Define the Media Gateway Starting RTCP Port
Number. The RTCP Port Number is the RTP
port 1.
RTP Port 1 10021
84-06-04 PVA Data Setting
– Fract Lost Threshold
Define the fractional lost threshold
– this data is
sent to the UNIVERGE SV9100 GCD-CP10
when the value exceeds the defined value.
0 ~ 100% 0
84-06-05 PVA Data Setting
– Packets Lost Threshold
Define the packet lost threshold
– this data is
sent to the UNIVERGE SV9100 GCD-CP10
when the value exceeds the defined value.
0 ~ 16777215 0
84-06-07 PVA Data Setting
– Jitter Threshold
Define the Jitter Threshold
– this data is sent to
the UNIVERGE SV9100 GCD-CP10 when the
value exceeds the defined value.
0 ~ 4294967295 seconds 0
84-06-09 PVA Data Setting
– Delay LSR Threshold
Define the Delay threshold
– this data is sent to
the UNIVERGE SV9100 GCD-CP10 when the
value exceeds the defined value.
0 ~ 4294967295 seconds 0