NEC Univerge SV9100, Features And Specifications

Page: 545 / 1402

545
Guide to Feature Programming
Program
Number
Program Name/Description Input Data Default
11-12-30 Service Code Setup (for Service Access)
–
Specified Trunk Answer
If required, redefine the service code used to
answer a specific trunk which is either ringing or
on hold.
MLT, SLT
0 ~ 9,
*
,
#
Maximum of eight
digits
772
11-12-33 Service Code Setup (for Service Access)
–
Group Hold
If required, redefine the service code used to
answer a specific trunk which is either ringing or
on hold.
MLT, SLT
0 ~ 9,
*
,
#
Maximum of eight
digits
832
11-12-34 Service Code Setup (for Service Access)
–
Answer for Group Hold
If required, redefine the service code used to
answer a specific trunk which is either ringing or
on hold.
MLT, SLT
0 ~ 9,
*
,
#
Maximum of eight
digits
862
14-01-16 Basic Trunk Data Setup
– Forced Release of
Held Call
Enable/Disable Forced Release of Held Call.
0 = Disable
1 = Enable
0
14-07-01 Trunk Access Map Setup
Set up the Trunk Access Maps. This sets the
access options for trunks.
0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when trunk on
Hold
4 = Outgoing access and access
when trunk on Hold
5 = Incoming access and access
when trunk on Hold
6 = Incoming and Outgoing
access
7 = Incoming access, outgoing
access and access when trunk
on Hold
Trunk Access Maps: 1 ~ 400
Access Maps
1 ~ 400 = Trunk
Ports 1 ~ 400
assigned with
option 7 access
(incoming and
outgoing access
and access
when trunk is on
Hold).
15-02-06 Multiline Telephone Basic Data Setup
– Hold
Key Operating Mode
Set the function of the Multiline Hold key.
0 = Normal (Common)
1 = Exclusive Hold
0