84
Program
Number
Program Name/Description
Input Data
Default
44-05-02
ARS/F-Route Table
– Delete Digits
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Enter the number of
digits to be deleted (0 ~ 255) from the dialed
number.
0 ~ 255
(255 = Delete All)
0
44-05-03
ARS/F-Route Table
– Additional Dial Number
Table
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Enter the table number
(defined in Program 44-06) for additional digits
to be dialed (0 ~ 1000).
0 ~ 1000
0
44-05-04
ARS/F-Route Table
– Beep Tone
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Select whether or not a
beep is heard if a lower priority trunk group is
used.
0 = Off (No Beep)
1 = On (Beep)s
0
44-05-05
ARS/F-Route Table
– Gain Table Number for
Internal Call
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Select the gain table
number to be used for internal calls (0 ~ 500).
0 ~ 500
0 = No Setting
0
44-05-06
ARS/F-Route Table
– Gain Table Number for
Tandem Connections
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Select the gain table
number to be used for the tandem call (defined
in Program 44-07)
0 ~ 500
0 = No Setting
0
44-05-07
ARS/F-Route Table
– ARS Class of Service
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Select the Class of
Service to be used for ARS (0 ~ 16). Extension
ARS COS is determined in Program 26-04-01.
0 ~ 16
0
44-05-08
ARS/F-Route Table
– Dial Treatment
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Select the Dial
Treatment to be used (0 ~ 15). The Dial
Treatments are defined in Program 26-03-01.
0 ~ 15
0
44-05-09
ARS/F-Route Table
– Maximum Digit
Set the maximum number of digits to send
when using the F-Route.
0 ~ 24
0
44-05-10
ARS/F-Route
– CCIS over IP Destination
Point Code
For each ARS/F-Route table (1 ~ 500). Set the
CCIS over IP Destination Point Code
(0 ~ 16367).
0 ~ 16367
0
Summary of Contents for Univerge SV9100
