NEC Univerge SV9100, Features And Specifications

Page: 717 / 1402

717
Program
Number
Program Name/Description Input Data Default
24-09-03 Call Forward Split Settings - Intercom Call
Forwarding Destination for Both ring, All
Call, No Answer
Assign Intercom Call Forwarding Destination
for ring, all call and no answer.
1 ~ 9, 0, #, *, R, @
Maximum of 24 digits
No Setting
24-09-04 Call Forward Split Settings
– CO Call
Forwarding Busy Destination
Assign CO Call Forwarding for busy
destinations.
1 ~ 9, 0, #, *, R, @
Maximum of 24 digits
No Setting
24-09-05 Call Forward Split Settings
– Intercom Call
Forwarding Busy Destination
Assign Intercom Call Forwarding for busy
destinations.
1 ~ 9, 0, #, *, R, @
Maximum of 24 digits
No Setting
24-09-06 Call Forward Split Settings
– Call
Forwarding Destination for CTX/PBX for All
Call, No Answer
Assign Call Forwarding for CTX/PBX all call, no
answer destinations.
1 ~ 9, 0, #, *, R, @
Maximum of 24 digits
No Setting
24-09-07 Call Forward Split Settings
– Call
Forwarding Destination for CTX/PBX for
Busy
Assign Call Forwarding destinations for busy
CTX/PBX calls.
1 ~ 9, 0, #, *, R, @
Maximum of 24 digits
No Setting
84-24-01 DT800/DT700 Multiline CODEC Information
Basic Setup
– Number of G.711 Audio
Frames
Input the amount of audio in the packets when
using the G.711 Codec.
This should be set to 20ms (2).
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
2
84-24-28 DT800/DT700 Multiline CODEC Information
Basic Setup
– Audio Capability Priority
Set voice (RTP packet) encoding parameters.
The ML440 only supports G.711.
0 = G.711_PT
2 = G.729_PT
0
84-26-01 IPL Basic Setup
– IP Address
Assign the IP address for each DSP on the
GPZ-IPLE.
xxx.xxx.xxx.xxx 172.16.0.20
84-26-02 IPL Basic Setup
– RTP Port Number
Assign the RTP port number to be used for
each DSP on the GPZ-IPLE.
Only even numbered ports are supported.
0 ~ 65534 10020
84-26-03 IPL Basic Setup
– RTCP Port Number (RTP
Port 1)
Define the TCP port number for RTCP to use
for each DSP.
0 ~ 65534 10021
Operation
Refer to the UNIVERGE SV9100 IP-DECT Customer Engineer Manual for additional information. For specific
handset information, refer to the following:
❍
ML440 End User Guide
❍
G266 and G566 Handsets User Guide