NEC Univerge SV9100, Features And Specifications

Page: 936 / 1402

936
Operation
Programmable Function Keys
To define a Programmable Function Key as a One-Touch Key:
1. Dial the service code for Function Key Programming (Program 11-11-17, 851 by default).
2. Press the key to be defined.
3. Dial 01 (DSS/One-Touch Key Operation).
4. For Direct Station Selection (Extension):
a. Dial extension number you want assigned to that key.
b. Press Hold .
c. Press Speaker .
For Personal Speed Dial :
a. Dial the general trunk access code ( 9 ).
- OR -
Dial the Specific Trunk Service Code ( 805 ) plus the trunk number (e.g., 005).
- OR -
Dial the Trunk Group Service Code ( 804 ) plus the trunk group number (e.g., 1).
b. Dial the number you want to store.

The total of the digits stored in steps 3 and 4 cannot exceed 24.

Valid entries are 0~9,
#
and
*
. To enter a pause, press MIC. To store a Flash, press Redial.
c. Press Hold .
d. Press Speaker .
For Speed Dial
– System/Group:
a. Dial 813 to store a Speed Dial
– System dialing number.
- OR -
Dial 814 to store a Speed Dial
– Group dialing number.
b. Dial Speed Dial number storage code (e.g., 001).
c. Press Hold .
d. Press Speaker .
For Central Office Calls, Placing (Trunk Calling):
a. Dial the general trunk access code ( 9 ).
- OR -
Dial the specific Trunk Service Code ( #9 ) plus the trunk number (e.g., 005).
- OR -
Dial the Trunk Group Service Code ( 704 ) plus the trunk group number (e.g., 1).
b. Dial the telephone number to be stored.
c. Press Hold .
d. Press Speaker .
For Service Codes:
a. Dial the Service Code you want stored.

For example, if you want a One-Touch Key to automatically clear your Last Number Redial, enter 776.