1164
Program
Number
Program Name/Description
Input Data
Default
51-01-02
NetLink System Property Setting
– Primary
Candidate Order
When the Primary system is turned off or
disconnect from network, this value is used to
select a new Primary system. Smaller number
is higher priority.
If this value is the same number, the System ID
(Program 51-01-01) is referred, and the system
which has the smaller number is selected as
Primary system.
1 ~ 50
30
51-01-03
NetLink System Property Setting
–
Secondary System Flag
If set to 0, NetLink is dynamically established
based on Node List in Program 51-03-01.
Primary System is selected in the order the
system wakes up.
If set to 1, the system connects with Top Priority
Primary System. If Top Priority Primary System
is not found, the system searches Primary
System like this is set to 0.
0 = Disable
1 = Enable
0
51-01-04
NetLink System Property Setting
– Signal
Transmit Method
0 = Immediate
This default setting does not use the Nagle
Algorithm. When enabled, data packets are
immediately sent across the network with no
buffering delay.
1 = Buffering
Nagle Algorithm enabled. Small data packets
are not transmitted immediately across the
network. The smaller data packets will be
buffered and then sent across as larger data
packets decreasing the number of packets sent
across the network. When the number of
packets sent across the network decreases, the
amount of bandwidth also decreases.
0 = Immediate
1 = Buffering
1
51-02-01
NetLink System Individual Setting
– System
Name
Enter the name given to each system.
Maximum of 20 characters.
No Setting
51-02-02
NetLink System Individual Setting
– Time
Zone (Hour)
Determine the time offset from the Primary
system.
(0 = -12, 1 = -11, 2 = -10.... 24 = +12)
This setting affects Time Display on MLT (see
Program 51-13-02).
0 ~ 24
12
51-02-04
NetLink System Individual Setting
–
Authenticate System MAC Address
Set Program 51-13-03 to 1 (enable). NetLink
systems reject the connection from
unauthenticated system access.
00-00-00-00-00-00 ~
FF-FF-FF-FF-FF-FF
00-00-00-00-00-
00
Summary of Contents for Univerge SV9100
