NEC Univerge SV9100, Features And Specifications

Page: 242 / 1402

242
Guide to Feature Programming
Program
Number
Program Name/Description Input Data Default
11-10-17 Service Code Setup (for System
Administration)
– Dial Block by Supervisor
Assign a service code used by the supervisor to
set Dial Block for another extension.
MLT
0 ~ 9,
*
,
#
Maximum of eight
digits
701
11-11-33 Service Code Setup (for Setup/Entry
Operation)
– Dial Block
Assign a service code to use for Dial Block.
MLT, SLT
0 ~ 9,
*
,
#
Maximum of eight
digits
700
20-06-01 Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to
extensions.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-08-08 Class of Service Options (Outgoing Call
Service)
– Toll Restriction Dial Block
Turn Off or On an extension user ability to use
Dial Block.
0 = Off
1 = On
COS 1 ~ 15 = 0
21-07-01 Toll Restriction Override Password Setup
Assign Toll Restriction Override codes to
extensions. Each code must have four digits,
using any combination of 0 ~ 9,
#
and *. Each
extension can have a separate code, or many
extensions can share the same override code.
Maximum of four digits (fixed) No Setting
21-09-01 Dial Block Setup
– Toll Restriction Class
with Dial Block
Assign a Code Restriction COS (1 ~ 15) when
the Dial Block feature is used.
1 ~ 15 15
21-09-02 Dial Block Setup
– Supervisor Password
Assign a 4-digit password used by the
supervisor to enable or disable Dial Block for
other extensions.
0 ~ 9, *, #
(4-digit fixed)
No Setting
21-10-01 Dial Block restriction Class per Extension
Assign the Code Restriction COS (1 ~ 15) used
by an extension when the Dial Block feature is
enabled. If this data is 0, Code Restriction COS
follows Program 21-09-01.
0, 1 ~ 15
(0 = No Setting)
0
90-19-01 Dial Block Release
Enter the extension number to release from the
Dial Block Restriction. This program can be
used when a password is forgotten by the user.
[Release?]: Dial 1 + press
Transfer
(Press Transfer to cancel.)
No Setting
Operation
To set Dial Block:
1. At the multiline terminal, press Speaker .
- OR -
At the single line telephone, lift the handset.
2. Dial 700 (default).