NEC Univerge SV9100, Features And Specifications

Page: 823 / 1402

823
Program
Number
Program Name/Description Input Data Default
44-02-02 Dial Analysis Table for ARS/F-Route Access
– Service Type
Select the Service Type.
0 = No Setting (None)
1 = Extension Call (Own)
2 = ARS/F-Route Table
(F-Route)
3 = Dial Extension Analyze
Table (Option)
0
44-02-03 Dial Analysis Table for ARS/F-Route Access
– Additional Data
Enter the additional data required for the
service type selected in Program 44-02-02,
either the number of digits to be deleted or the
table number to be used.
1 = Delete Digit = 0 ~ 255
(255: Delete All Digits)
2 = 0 ~ 500
(0 = No Setting)
3 = Dial Extension Analyze
Table Number = 0 ~ 4
(0 = No Setting)
0
44-05-01 ARS/F-Route Table
– Trunk Group Number
Select the trunk group number used for the
outgoing ARS call (1 ~ 100).
0 ~ 100, 255
0 = No Setting
255 = Extension Call
0
44-05-04 ARS/F-Route Table
– Beep Tone
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Turn Off or On a beep
tone if a lower priority trunk group is used.
0 = Off (No Beep)
1 = On (Beep)s
0
44-05-07 ARS/F-Route Table
– ARS Class of Service
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Select the Class of
Service used for ARS. An extension ARS COS
is determined in Program 26-04-01.
0 ~ 16 0
44-05-08 ARS/F-Route Table
– Dial Treatment
For each ARS/F-Route table (1 ~ 500) assign a
priority number (1 ~ 4). Select the Dial
Treatment to be used for the table.
The recommended treatment code is D019RE
where 9 is the trunk access code in the destination
system.
The Dial Treatments are determined in Program
26-03-01.
0 ~ 15 0
44-05-09 ARS/F-Route Table
– Maximum Digit
Input the maximum number of digits to send
when using the F-Route.
0 ~ 24 0
44-05-10 ARS/F-Route Table
– CCIS over IP
Destination Point Code
Input the Destination Point Code to send when
using F-Route.
0 ~ 16367 0
50-01-01 CCIS System Setting
– CCIS Availability
No other CCIS settings function if this program
is disabled.
0 = Disable
1 = Enable
0
50-02-03 Connecting System Settings
– Originating
Point Code
For route ID 9, set the origination point code.
0 ~ 16367 No Setting