NEC Univerge SV9100, Features And Specifications

Page: 978 / 1402

978
Only one PCPro/WebPro/Handset can be programming the switch anytime.
When programming via WebPro/PCPro, some data requires you to logout before the switch
fully applies the changes. These Programs are: 10-21-2, 11-02 (for directory dial), 11-04
(for directory dial), 13-04 (for directory dial), 14-04, 15-05, 15-15, 16-02, 23-02, 31-02,
41-02, 41-17, 47-02, 47-03, 82-11 and 83-11.
In the card configuration window, if you click a card type in the main menu, the menu
closes. You must mouse over the card type to open the submenu to list all cards of that
type.
To access the modem over K-CCIS, route the modem access service code to the target
switch. Do not call a station that is call forwarded to the service code. When accessing the
modem over K-CCIS, enter the service code to be dialed in PC Pro.

PC Pro follows the PC dialing properties. If dialing a service code, you must turn off the dial 9
for outside line and area code inclusion or PC Pro will dial these digits as well.
Some program items require second initialization of the KTS before they take effect. These
Programs are: 10-12-01, 10-12-02, 10-12-03, 10-12-04, 10-13-01, 10-13-02, 10-13-03,
10-14, 10-15, 10-16-01, 10-16-02, 10-16-03, 10-16-04, 20-01-03, 47-01-01, 80-01,
80-02-01, 80-02-02, 80-02-03, 80-02-04, 80-03, 80-04, 84-03-01, 84-03-02, 84-03-06,
84-03-07, 84-03-08, 84-05-01, 84-05-02, 84-06-01, 84-06-02, 84-06-03, 84-06-04,
84-06-05, 84-06-06, 84-06-07, 84-06-08, 84-06-09, 84-06-10, 84-06-11, 84-09 and 84-10.
PCPro and WebPro have been enhanced allowing T1/ISDN layer 1 status, System Alarms
and SRAM information to be viewed. The SRAM displays Day/Night Mode information,
Trunk information (Trunk to Trunk Transfer Set/Not Set, Trunk disabled), Read List,
Department Group information (DND, Transfer settings) and Extension information
(Forwarding settings, Alarm settings, DND, BGM and more).
WebPro supports remote upgrade and is only available in the Manufacture (MF) and
Installer (IN) level logins.
WebPro supports Backup of the system data and also the restoring of a Backup.
Backup data is saved with a .pcpx file extension.
When the Backup is restored, the system resets after the upload is completed.
Only available in Manufacture (MF), Installer (IN), and System Administrator 1 (SA1) level
logins.
When other users are logged in by WebPro or Handset programming, the backup or
restoration of system data cannot be performed.
During Netlink Replication Web/PC Programming or Handset Programming is not
accessible.