NEC Univerge SV9100, Features And Specifications

Page: 118 / 1402

118
Turn on the Private Call Refuse mode using the service code (Program 11-10-32) or Programmable
Function Key (code 86).
To reject the call with
“2142622000” Caller ID incoming call:
Program 14-01-27: 1 (reject)
Program 20-07-25: 1 (Enable for COS)
Program 22-16: 64 (Speed Dial group 64)
Program 13-02; Group 64: 1000 - 1099
Program 13-04-01; Table 1000: 2142622000
then,
Turn on the Caller ID Refuse mode using the service code (Program 11-10-34) or Programmable
Function Key (code 87).
To transfer the call with
“2142622000” Caller ID incoming call to extension 301 as ring pattern 1:
Program 13-04-01: 2142622000
Program 13-04-03: 1 (extension number)
Program 13-04-04: 301 (extension 301)
Program 13-04-05: 1 (tone pattern 1)
To transfer the call with
“2142622000” Caller ID incoming call to incoming ring group 2 as ring
pattern 2:
Program 13-04-01: 2142622000
Program 13-04-03: 2 (incoming ring group)
Program 13-04-04: 2 (group 2)
Program 13-04-05: 2 (tone pattern 2)
Conditions
Caller ID Matching.
The UNIVERGE SV9100 compares the Caller ID and programmed Speed Dial and allows/
denies as indicated below.
The Speed Dial table is searched from the starting number and the first match result is
used.
The maximum number of VRS message channels that can be used simultaneously is 16.
These channels are also shared with the voice mail.
This feature does not work with incoming trunk calls via networking (from another system). In
this case, the refuse/routing program must be programmed in the system that has those
trunks. Routing to the other
system’s extension is available.
When Program 13-04 is used; it will override the setting in Program 22-02-01: Incoming
Call Trunk Setup.
Program 13-04 will follow Common or Group Speed Dial numbers.