NEC Univerge SV9100, Features And Specifications

Page: 580 / 1402

580
The Quick Transfer to Voice Mail is not allowed when caller is:
Listening to the busy tone (BT).
Talking on an internal line.
Talking on an outside line.
Making a conference call.
The following options must be changed from WebPro, PCPro or system programming for
group subscriber mailboxes:
Email Notification
Message Notification
Find-Me Follow-Me
Auto Play
The following options can only be changed from UserPro, WebPro, PCPro or system
programming for
station subscriber mailboxes:
Email Notification
Message Notification
Find-Me Follow-Me
Auto Play
While on an intercom (ICM) call, dial the Quick Transfer Access Code (default: 8) to
automatically transfer to that station Voice Mail box.
Extension ID numbers cannot start with 0, 9,
*
or
#
.
Mailboxes with extension IDs of 10-32 are not supported as these are already used by fixed
system resources.
Distribution List members can only have 2 or 3 digit extension IDs.
Live Record does not work for monitored calls.
Live Record does not work for conference calls.
Fixed Call Forwarding can be used to transfer a
user’s unanswered calls to their voice mail.
Call Forwarding does not have to be programmed manually by each user.
Off-premise notification and external extensions require access to outside lines.
When the voice mail places a call on hold, it uses Group Hold. Any line appearances for the
trunk shows the hold flash rate, however, a user cannot pick up this call (a busy signal is
heard).
Updating the system time also updates the InMail time.
InMail and UM8000 Mail cannot be used at the same time in the same system.
The displayed message count for New and Saved messages does not update until the
mailbox user hangs up and calls back into the InMail.
InMail and Analog Voice Mail cannot be used at the same time in the same system.
When the system has the Hotel Motel license (BE114071), the Message Waiting Indication
(MWI) on a DSS Console for an extension is a Green LED. Without the Hotel Motel license
the MWI on a DSS Console for an extension is a Red LED.