NEC Univerge SV9100, Features And Specifications

Page: 357 / 1402

357
Operation
To use Directory Dialing from a multiline terminal with an LCD:
1. Press the Dir softkey.
- OR -
Press the Right Cursor key.
2. Press the softkey for the Directory Dialing type:
SPD
–Speed Dials
EXT
–co-worker’s Extensions
STA
–Personal Speed Dials
TELBK
–Telephone Book
 Directory Dialing follows any feature restrictions that your system may have enabled. For
example, if your extension cannot normally use Speed Dial - System/Group/Station, Directory
Dialing can not access it either.
3. Dial letter/number range for the party you want to call (e.g., dial 2 for A, B, C or 2).
 You can enter several letters to help narrow the search.
 Press
#
to enter additional letters on the same key (ex: TOM = 8666
#
6).
4. Press the Down Arrow softkey to jump to that section.
5. Press the Volume
▲
or
▼
key to scroll through the list.
 If you wait too long between your selections, Directory Dialing automatically cancels.
6. Lift the handset or press the DIAL softkey, or press Speaker to place the selected call.
 If you selected an outside call, it routes according to your system Trunk Group Routing/ARS setup.
To cancel Directory Dialing:
Press the Exit key.