MUTOH Zephyr TS, User Manual, Page: 68 / 300

User’s Guide Zephyr TS
Basics
68 AP-75390 - Revision 1.0
Step 18:
Select the media type you are using. In this case select roll.
Step 19:
To obtain an equal tension, pull the media on the front of the printer until the rear
tensioning system gently hits the back.
Step 20:
Set the media control settings as preferred.
Step 21: Media control settings on page 9 2
Step 22:
Close the front cover.
Step 23:
Press the foot pedal while holding the media.
Refer to
Using the footpedal on page 3 0

The pressure rollers move downwards and the media is loaded.
Step 24:
Feed the media until you are able to stick it to the front core.
Step 25:
Cut the front side of the media into a V-shape. This to become an equal tension on
the media when loaded.
Step 26:
Tighten the media to the core with one single tape.
Note

Position the media retainers to prevent media curls causing head strikes.
Refer to
Using the media retainers on page 97