MUTOH Zephyr TS User Manual Download Page 57

Page: 57 / 300

User’s Guide Zephyr TS

Basics

AP-75390 - Revision 1.0

4.4.7 Setup

tab

Use the

Setup

tab to:



Set the language.



Language and input settings on page 17



Set the keyboard preference.



Keyboard preference on page 17



Set time and date.



Time and date on page 176



Set the mouse settings.



Mouse settings on page 175



Create or restore a parameter backup.



Creating and restoring a parameter backup on page 177



Set the network settings.



Network setup on page 180



Make job management settings



Making job management settings on page 184



Set the user preference media settings.



Media setup on page 190



Set the heater settings.



Heater setup on page



Set the UV settings.



UV setup on page

Summary of Contents for Zephyr TS













































































































































































































































































































Search results

Summary of Contents for Zephyr TS

Reviews:

MUTOH Zephyr TS, User Manual, Page: 57 / 300

Search results

Summary of Contents for Zephyr TS

Reviews: