manualshive.com logo in svg

MUTOH Zephyr TS, User Manual, Page: 17 / 300

Share
Download
MUTOH Zephyr TS User Manual Download Page 17

User’s Guide Zephyr TS

Safety instructions

AP-75390 - Revision 1.0

17

1

Do not place the printer in humid and dusty areas or in areas exposed to flammables. 
Doing so may result in electrical shock or fire.

Do not cover the ventilation hole(s) of your printer with cloth, such as a blanket or table 
cloth. Doing so could obstruct ventilation and could cause fire.

Do not insert or drop metal or inflammable objects into openings, such as ventilation 
outlets. Doing so may result in electrical shock and fire.

Stop using your printer if a liquid has been spilled into it. This may cause electrical shock, 
fire or damage to the electronics. Switch the printer off as soon as possible, unplug the 
power cord, and contact your local Mutoh dealer.

Be sure to power OFF the printer and unplug the power cable from the outlet before 
cleaning the printer. Use a damp cloth to clean the printer. Do not use thinner, benzene, 
alcohol or other active agents. Doing so may result in damage or paint peeling from the 
casing.

Do not tilt the printer when it is loaded with ink. Doing so may cause ink to leak inside the 
printer. Movement after installation is also not covered by the warranty.

When cutting the roll media, be careful that you handle correct. Incorrect handling can 
result in injury to the hands and fingers from the razor blade.

To prevent back pains and other injuries, always work with at least 4 people to unpack or 
move the printer. Keep the printer horizontally during transportation

Do NOT transport the printer to another room without contacting your local Authorized 
Mutoh Dealer.

Summary of Contents for Zephyr TS













































































































































































































































































































Reviews:

No comments