MUTOH Zephyr TS, User Manual, Page: 132 / 300

User’s Guide Zephyr TS
Basics
132 AP-75390 - Revision 1.0
Other settings
In this window you will adjust the vacuum force, the head gap and the step adjust.

Slide the vacuum bar to adjust the vacuum force.

To adjust the step correction, click the value with your mouse and adjust the value.
Refer to
Set the correct distance adjust (step) on page 106

The swath interval setting enables you to set a time between two print swaths. This can be
used to change the drying behaviour of your print and other applications such as making
glossy prints.

With the scanwidth option, you can set the time between two print passes. This is useful to
let the ink bleed (if wanted) or let the temperature of your media decrease. (When the UV
lamp constantly moves over the media, the temperature will increase)
Setting the correct scanwidth
It is possible to specify the carriage movement along the media. This will have a direct effect
on the drying time. To set the scanwidth, proceed as follows.

Click the drop down menu to select the appropriate scan width.
Setting Description
Job The carriage moves only over the printing area
Media The carriage moves over the media
printer The carriage moves over the full width of the printer