manualshive.com logo in svg

MUTOH Zephyr TS, User Manual, Page: 131 / 300

Share
Download
MUTOH Zephyr TS User Manual Download Page 131

User’s Guide Zephyr TS

Basics

AP-75390 - Revision 1.0

131

4

Heater setup window

This window gives you the opportunity to change the heater settings, and the possibility to 
skip waiting for the heaters. When selecting this checkbox, the printer will start printing even 
when the heaters are not totally warmed up.

UV power window

In the UV power window you will adjust the power of the leading lamp and the trailing lamp. If 
you choose the option symmetric, the power will be the same in both forward as backward 
direction.

Note

It is recommended to use the intelligent heater control.

Note

Please note that the leading lamp is the first lamp and the trailing lamp is the 
second lamp.

Note

Enabling the checkbox will override the UV-settings, coming from the rip 
software. The UV settings in this window will always be used.

Disabling the checkbox will ignore the settings in this window. Default UV 
settings coming from the rip software (and profile) will be used.

Summary of Contents for Zephyr TS













































































































































































































































































































Reviews:

No comments