MUTOH Zephyr TS User Manual Download Page 49 | Manualshive

Page: 49 / 300

MUTOH Zephyr TS User Manual Download Page 49

User’s Guide Zephyr TS

Basics

AP-75390 - Revision 1.0

49

4

Step 2:

Close the 4 ink valves to prevent ink leaks.



The ink valves are closed if the handles are horizontal positioned.

Step 3:

Proceed with the emergency capping.

Refer to

Emergency capping procedure on page 50

Step 4:

Turn the emergency stop clockwise to release it.



All printer activities will remain stopped.



If the operation panel displays an error, click

OK

to try to re-initialize the software.



If the re-initialization does not work, minimize the User Interface to see the
desktop. In the task bar, right click on the tray icon and choose “KillAll”.

Step 5:

Restart the software.



If the operation panel displays an error, shut down the printer.

Refer to

Switching the power OFF on page 45

Step 6:

Leave the printer for 1 minute before restarting it.

Refer to

Switching the power ON on page 40

Important



Make sure to solve the situation that caused the emergency shutdown before
resetting the emergency button.

«
...
47
48
49
50
51
...
»

Summary of Contents for Zephyr TS













































































































































































































































































































Reviews:

No comments