manualshive.com logo in svg

MUTOH Zephyr TS, User Manual, Page: 218 / 300

Share
Download
MUTOH Zephyr TS User Manual Download Page 218

User’s Guide Zephyr TS

Periodical maintenance

218

AP-75390 - Revision 1.0

7.1 

Done by end user

This chapter describes the periodical services required on a Zephyr TS. The periodical 
services ensure stable printout quality of the machine. 
In the periodical services, some parts need to be checked, cleaned or replaced by the end 
user or by a Mutoh service technician.

Note

Please use Original Mutoh spare parts.

Any problems caused by use of non-original Mutoh inks, spare parts, 
consumables, ... will not be covered by the warranty.

Note

This maintenance is based on use:

8 hours / day, 5 days / week and 44 weeks / year.

If a machine is used more, maintenance periods will come earlier.

Summary of Contents for Zephyr TS













































































































































































































































































































Reviews:

No comments