MUTOH Zephyr TS, User Manual, Page: 40 / 300

User’s Guide Zephyr TS
Basics
40 AP-75390 - Revision 1.0
4.2 Switching the Power ON / OFF
This section describes how to power ON and OFF the Zephyr TS. When switching ON the
printer, the computer automatically starts the software. From the monitor, the operator has
access to the printer’s User Interface (UI).
4.2.1 Switching the power ON
See also

Safety instructions on page 11

Starting up from a windows based environment on page 44

Emergency Shutdown on page 48

Cleaning the heads on page 22 4

Cleaning the receiver box on page 232

Checking the temperature and pressure settings on page 99

Heater settings on page 2 0 3

Adjusting the throttle on page 2 4 2

Performing a nozzle check on page 101
Be sure to read and understand the safety warnings before handling the printer.
Important

If a situation requires an immediate shutdown of all activities, push the
emergency stop.
Refer to
Emergency Shutdown on page 48
Note

Before powering ON, make sure that loose objects such as clothing, tools and
cleaning materials are not interfering with the printer mechanisms.