manualshive.com logo in svg

MUTOH Zephyr TS, User Manual, Page: 13 / 300

Share
Download
MUTOH Zephyr TS User Manual Download Page 13

User’s Guide Zephyr TS

Safety instructions

AP-75390 - Revision 1.0

13

1

1.2 

Handling inks + waste

Before handling inks/ cleaning and their waste, CAREFULLY READ THE MATERIAL 
SAFETY DATA SHEETS (MSDS) and the labels for important health, safety and 
environmental information. Post these documents in the work area as required by federal or 
local law. All safety data sheets are periodically updated. These sheets and their translations 
can be found on 

www.mutoh.eu

Engineering measures:

 

Although no Volatile Organic Compounds are released, please do work with forced 
ventilation to prevent contact with ink mist/dust.

It's recommended to be equipped with an eyewash-shower.

Personal protection:

General: Keep away from foodstuffs, beverages. Always wash your hands before breaks 
and at the end of work.

Protection of hands: The operator must wear suitable gloves. The selection of gloves 
depends on the level of exposure. (nitrile for short-exposure times, butyl rubber gloves for 
long-time exposure). Always ensure that gloves are free from defects and that they are 
stored and used correctly. Exact breakthrough time has to be obtained from the 
manufacturer of the gloves. Wash hands after removal of gloves.

Eye protection: Wear UV suitable safety glasses. Avoid contact lenses.

Body protection: Wear protective work clothing with long sleeves; disposable overalls are 
preferable. Immediately remove all soiled and contaminated clothing. Avoid jewellery and 
watches because ink can be trapped between skin and jewellery which can lead to 
irritation.

Important

Both UV-inks as well as the UV-curing lamps can be harmful if not handled 
correctly. Follow these instructions carefully for maximum safety.

Caution

Acrylates are skin and/or eye sensitizers. Since acrylates do not evaporate, 
they will remain on the skin or clothes for extended periods. This long term 
exposure, caused by the non-volatility, can give rise to dermatitis. It is 
essential that the given protection measures are always followed.

Important

When handling inks, it is recommended that the operator wears nitrile rubber 
gloves, a protective apron and UV suitable safety glasses with side shields.

Summary of Contents for Zephyr TS













































































































































































































































































































Reviews:

No comments