manualshive.com logo in svg

MUTOH Zephyr TS, User Manual, Page: 182 / 300

Share
Download
MUTOH Zephyr TS User Manual Download Page 182

User’s Guide Zephyr TS

User preferences

182

AP-75390 - Revision 1.0

5.3.1 TCP/IP 

setup

Step 1: 

In the Tcp/IIp setup window, you have 2 options.

Refresh

. Click 

refresh

 to refresh the IP address.

Adjust

. Click 

adjust

 to make personal settings.

When clicking the 

Adjust

 button, a new window opens.

In this window you have the ability to choose to obtain an IP address 
automatically or use a personal IP address.

The IP address must be between 000.000.000.000 and 223.255.255.254.

The subnet mask must between 000.000.000.000 and 255.255.255.252.

The default gateway must between 000.000.000.000 - 255.255.255.255

Note

For more information on this topic, contact your IT department.

Summary of Contents for Zephyr TS













































































































































































































































































































Reviews:

No comments