MUTOH Zephyr TS, User Manual, Page: 100 / 300

User’s Guide Zephyr TS
Basics
100 AP-75390 - Revision 1.0

The ink status window appears. In this window you are able to verify:

The temperature of the heads

The cooling system

The pressure of the ink system

The pressure of the degasser.
Note

To obtain optimal printing quality, the following values need to be reached
before starting printing.

The temperature of the cooling system must be ± 43°C

The temperature of each head must be ± 43°C.

The ink system pressure must be -52.5 mbar ± 0.5.

The degasser pressure must be between 800 and 900 mbar.

The ink sub pressure pump must be 50% ± 5.

In case it exceeds, refer to
Adjusting the throttle on page 2 4 2